Sale!

PreSonus Eris E8 8″ Powered Studio Monitor

$429.00 Inc GST

-14%
  • 8″ Kevlar Woofer and 1.25″ Tweeter
  • 130W Class AB Biamplification
  • 105dB Max SPL
  • Resonance-Suppressing Internal Bracing
  • Acoustic Tuning Controls

Discontinued Product see 8XT

Notify me when the item is back in stock.

Brand:Presonus

Free NZ shipping on all orders over $499 (Select at Checkout)

  • $9 Flat Rate Shipping (For Orders Under $499)
  • Order Before 12pm to get Dispatched Same Day (Hamilton Stock Only) Excludes Weekends and Holidays
    *If Only 1 item is Left in stock this may have been opened for display
    *Image is for illustrative purposes only. Please refer to product description.

The Eris E8 Two-Way Active 8″ Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low frequency transducers, low-mass silk-dome tweeters and responsive Class AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

The E8 begins with a front-ported enclosure made of vinyl-laminated MDF. It features an 8″ Kevlar low-frequency woofer driven by a 75W, Class AB amplifier. For the highs, Eris employs a 1.25″ silk-dome tweeter powered by a 65W, Class AB amplifier. The E8 outputs a clean 105 dB peak SPL. Its frequency response is rated at 35Hz to 22kHz.

The Eris E8 provides a balanced XLR, a balanced ¼” TRS, and an unbalanced RCA line-level input. Once you’re plugged in, set the Input Gain and you’re ready to go!

Key Features

Acoustic Tuning Controls
The Eris provides three AEQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors to your space. The Low control also is useful when using the E8 with a subwoofer.

The High control is a shelving filter that boosts or cuts all frequencies above 4.5kHz by as much as 6dB. The Mid control is a mid-frequency peak filter that boosts or cuts frequencies centred at 1kHz and extending about one octave above and below that frequency. The Low Cutoff control rolls off frequencies below either 80 or 100Hz at a slope of 12dB/octave. This control is especially useful if you also have a connected subwoofer.

Acoustic Space Control
A three-position Acoustic Space switch controls a second-order, low shelving filter that cuts frequencies below 800 Hz by either 2 or 4dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.

Thorough Protection Circuitry
RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. “Soft startup” amplifiers prevent damaging pops from sounding through the speakers when you power them up.

Specifications

Inputs 1 x XLR balanced
1 x 1/4″ TRS balanced
1 x RCA phono unbalanced
Frequency Response 35 Hz to 22 kHz
Crossover Frequency 2.2 kHz
LF Amplifier 75W
HF Amplifier 65W
Maximum SPL 105 dB @ 1 metre
Low Frequency Driver 8″ (10.32 cm) Kevlar
High Frequency Driver 1.25″ (3.18 cm) silk dome
Input Impedance 10kΩ
Volume Control A-type taper
Equalisation HF Control: -6, 0, +6 dB; continuously variable
MF Control: -6, 0, +6 dB; continuously variable
Low Cut Filter: Flat, 80 Hz, 100 Hz; switchable
Acoustic Space Control: Flat, -2 dB, -4 dB; switchable
Protection RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
Enclosure Material Vinyl-laminated MDF
Power Requirements 100 to 120V or 220 to 240V, 50/60 Hz
Dimensions (W x D x H) 250 x 299 x 384 mm
Weight 10.07 kg

Brand

Presonus