| SuperSplitterARX’s new SuperSplitter is a transformer isolated one input to three outputs passive splitter. It is ideal for splitting one audio signal three ways in applications where complete Galvanic isolation is required. Galvanic Isolation using a transformer is the classic method used to prevent Ground Loops and Hums, providing Noiseless Signal routing, Broadcast Split feeds, Remote Recording splits and many more applications.
The SuperSplitter allows Phantom powering of Microphones and Direct Boxes via the Direct Out to Input XLR, and features 3 XLR direct & Isolated outputs. Features:
The SuperSplitter is housed in a heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber base pad. Security features include an optional bracket kit for under-table mounting. The ARX SuperSplitter is hand made in Australia |
|
| T E C H N I C A L || S P E C I F I C A T I O N S | |
|
SuperSplitter Specifications Input Impedance 300 Ohms Output Impedance 2 secondaries @ 600 Ohms each Frequency Response 30Hz – 20 KHz ± 1dB Maximum Output Level + 20dBm THD at Max Output 0.2% 30 Hz – 20KHz @ 20dBm Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load) Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold Direct Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold Split 1 and Split 2 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold. Audio grounds not connected; Pin 1 is floating. |
|
