Shure QLXD24-B58A Handheld Wireless System With Beta 58A Microphone
$3,388.00 Inc GST Add to cart

Shure QLXD24-B58A Handheld Wireless System With Beta 58A Microphone

$3,388.00 Inc GST

.

Can Order From Suppler Delivery Times Vary as some shipments are Delayed - Contact For ETA

Brand:Shure

Free NZ shipping on all orders over $499 (Select at Checkout)

  • $9 Flat Rate Shipping (For Orders Under $499)
  • Order Before 12pm to get Dispatched Same Day (Hamilton Stock Only) Excludes Weekends and Holidays
    *If Only 1 item is Left in stock this may have been opened for display
    *Image is for illustrative purposes only. Please refer to product description.

Overview

For capturing audio, the QLXD24/B58 Handheld Wireless Microphone System by Shure is a good choice. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control and AES-256 encryption.

The QLXD wireless system is built with switching diversity and automatic channel scan, and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The handheld also has a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance, the QLX-D delivers good clean audio and provides professional features for demanding live sound events and installations.

The QLXD24/B58A system includes a QLXD4 receiver, QLXD2 Transmitter with Beta58A capsule, PS23 power supply, two 1/2 wave antennas, two 2′ BNC cables with bulkhead adapters, zipper bag, two AA alkaline batteries, and rackmount hardware.

Key Features

  • Interchangeable Beta58A microphone cartridge
  • 120 dB dynamic range
  • Digital predictive switching diversity receiver to capture the clearest sound
  • 64 MHz tuning bandwidth
  • Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Automatic channel scan
  • Selectable display mode showing group/channel, frequency, or battery runtime
  • Rugged metal construction

Specifications

System Specifications
RF Carrier Frequency Range H50: 534-598 MHz
Working Range 328′ (100 m)
Note: Actual range depends on RF signal absorption, reflection and interference
RF Tuning Step Size: 25 kHz, varies by region
Image Rejection Greater than 70 dB, typical
RF Sensitivity -97 dBm at 10-5BER
Latency Less than 2.9 ms
Audio Frequency Response QLXD1: 20 Hz – 20 kHz (±1 dB)
QLXD2: Dependant on microphone type
Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical
Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4″ (6.35 mm) output
Operating Temperature Range -18 to 50°C
Note: Battery characteristics may limit this range
Storage Temperature Range -29 to 74°C
Note: Battery characteristics may limit this range.
Mic Capsule
Type Beta 58A
Frequency Response 20 Hz to 20 kHz
Polar Pattern Cardioid
Receiver
Housing Steel
Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive)
RF Input Spurious Rejection: Greater than 80 dB, typical
Connector Type: BNC
Impedance: 50 ohms
Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps
Configuration: 1/4″ (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance 1/4″ (6.35 mm), 100 ohms (50 ohms Unbalanced)
XLR: 100 ohms
Full Scale Output: 1/4″ (6.35 mm), +12 dBV
XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad
Phantom Power Protection: 1/4″ (6.35 mm), Yes
XLR: Yes
Networking Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Ethernet Cable Length: 100 m
Dimensions (H x W x D) 41 x 197 x 151 mm
Weight 777 g
Handheld Transmitter
Housing Machined aluminium
Mic Offset Range 0 to 21 dB (in 3 dB steps)
Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime At 10 mW:
Shure SB900: up to 10 hours
Alkaline: up to 9 hours
Audio Input Configuration: Unbalanced
RF Output Antenna Type: Integrated Single Band Helical
Occupied Bandwidth: Less than 200 kHz
Modulation Type: Shure proprietary digital
Power: 1 mW or 10 mW
Note: See Frequency Range and Ouput Power table, varies by region
Dimensions (L x Diam) 256 x 51 mm
Weight 347 g

In The Box

  • Shure QLXD24-B58A Handheld Wireless System With Beta 58A Microphone
  • QLXD4 Digital Wireless Receiver (H50: 534 to 598 MHz)
  • QLXD2/Beta58A Handheld Wireless Microphone Transmitter (H50: 534 to 598 MHz)
 
  • Product: Shure QLXD24-B58A Handheld Wireless System With Beta 58A Microphone
  • Manufacturer: Shure
  • Model: QLXD24/B58-H51
  • SKU: QLXD24/B58-H51
  • RM Product #: 23619
  • Element Type: Condenser

Brand

Shure