DB SYA 12″ Active Speaker With Bluetooth

SYA series aims to enhance usability and versatility in dBTechnologies’ 2-way active speaker series: combining efficiency to a professional sound performance, SYA systems feature Bluetooth® connection, 3 INPUT channels, impressive SPLs and a powerful DSP where linear phase FIR filters ensure the most accurate sound reproduction.

SYA 12 is a 2-way active speaker equipped a 12” woofer and one 1” compression driver (1.35 voice coil) .
The system is driven by a powerful and efficient 800 W amplifier featuring dBTechnologies’ advanced DSP processing where linear phase FIR filters allow the systems to deliver a coherent audio performance, uniform and crystal-clear from every listening position.
Moreover, users are enabled to enhance lower and upper frequencies with the convenient DSP preset function.
All cabinets feature 3 INPUT channels with independent level management: CH 1 is a balanced combo XLR/6.3 mm Jack line/mic INPUT with a switch to select source; Ch 2 is a balanced XLR and TRS jack IN; CH 3 allows to connect any device via Bluetooth® connection.
A balanced link XLR-M Output allows connection to a second loudspeaker or a mixer. A slide switch allow to select which signal is sent to the main output: LINK (the signal is taken before any level control) MIX (the signal is determined by the level control of each channel and Main).
The solid and versatile cabinets come with a clean and contemporary full grille design, enhancing both portability thanks to 3 integrated 3 handles (1xside and 1 on top) and multifuncionality: each cabinet can be used horizontally as a stage monitor (on both sides) and features a pole mount cup with 2 tilt angle options (0° and 7.5°) to use SYA on tripods or stacked on dBTechnologies Subs.
Sya comes with its soft cover equipped with a pocket specially designed for cable storage.

Specifications

Specifications

Model: SYA12
Speaker Type: 2-way active speaker
Frequency Response:
-10dB: 52Hz – 18kHz
-6dB: 55Hz – 17kHz

Maximum SPL: 127dB
HF Transducer: Compression driver with 1” exit, 1.35” voice coil
LF Transducer: 12” woofer with 2.5” voice coil
Dispersion: 90° x 60° (H x V)
Crossover Frequency: 1800Hz (24dB/oct.)
Amplifier: Custom-made
Amp Class: Class-D(LF) + Class A/B(HF)
Cooling: Active fan .
Power: 800W (peak)
Controller: 28/56-bit
AD/DA Conversion: 24-bit, 48kHz
Advanced DSP Functions: Linear Phase FIR Filters
Limiter: Peak, RMS, Thermal
Controls: Line/Mic, Channel Volume, Link/Mix, Presets
Indicators: Power On, Signal, Limiter LEDs
System Presets: Playback, Flat, Bass Boost, Wedge
Signal Input: 1 x combo (XLR/Jack), Mic/Line, 1 x XLR/TRS
Bluetooth: 1 x Bluetooth receiver
Signal Output: 1 x XLR Male (LINK/MIX)
Mains Connection: VDE

Cabinet: Material: Polypropylene
Handles: 3 (2 x sides, 1 x top)
Monitor Angle: 45°
Pole Mount: 36mm, double positioning
Operating Voltage: 220-240V, 50-60Hz
Dimensions: 365mm x 622mm x 342mm / 14.37” x 24.50” x 13.46” (W x H x D)
Weight: 16.5kg / 36.37lbs