-
Multi-view and Tiling Processor: Create & store custom multi-view layouts, recall custom presets in 1080p (2K) Multi-view mode
-
Quadrant Mode (4K or 2K): Independent outputs in four equally-sized windows
-
Multi-view Mode (2K): Linked/mirrored outputs in customized screen layout
-
-
Seamless Switching: Un-interrupted screen transitions during source selections
-
Independent matrix switching: In full-screen and quadrant modes, linked/mirrored in multi-view mode
-
Image Layering: Stack images with customizable priority settings
-
Window Transparency and Border: View content through each other and choose window bezel width and coloring
-
Multi-format Switch:
-
Input: 2 HDMI, 2 HDMI or Analog video, all with external audio
-
Output: 1 HDMI and 1 HDBaseT output. Rx unit included
-
-
HDBaseT Built-In: Included KD-X222PORx unit is powered by at KD-MLV4x2Pro
-
Signal Extension:
-
Up to 200 feet @ 1080p/60, 1080p/24, 1080i, 720p with third-party CAT5e/6
-
Up to 125 feet @ 4096×2160 30Hz [4:4:4] 8bit with third-party CAT5e/6
-
-
Ultra HD/4K Up-scaling: Outputs independently upscale to 4096×2160 30Hz [4:4:4] 8bit in 4K Quadrant mode
-
HDCP 2.2 Licensing: Fully licensed and compatible with HDCP 2.2
-
Resolution Support: Supports SD, HD, and VESA input resolutions up to 1080p / 1920×1200 on HDMI and analog video Inputs. Outputs fixed to 1080p or 4K
-
Web Control Interface: Reduces installation time and provides basic and advanced video and audio setup
-
Audio De-Embed: Audio from the selected input is be de-embedded through the Coax digital (PCM) output in addition to the HDMI output
-
Independent Video & Audio: Listen to any audio source while in quadrant or multi-view modes
-
Dolby Digital & DTS Audio: Supports 2-channel and multi-channel audio formats up to 5.1 Dolby® / DTS™ lossless compressed digital surround sound
-
Analog to Digital Video Conversion: Analog video input ports support VGA / DB15 or Component / YPbPr signal types
-
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
-
EDID: Internal library with 5 default EDID configurations for input, in addition to native EDID data for any Output / Display
-
TMDS Re-clocking: Support for long HDMI connectivity using Key Digital® HDMI cables
-
Deep Color Support: Up to 12 bits/color
-
Control: Front panel buttons, IR, RS-232, TCP-IP and Web Control
-
Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
-
Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® App
Technical:
- Inputs: 4 HDMI connectors, Type A, 19 pin female; 2 HD analog video 15-pin female, 4 analog audio connector, 3.5mm stereo female
- Outputs: 1 HDMI connector, Type A, 19 pin female; 1 HDBaseT RJ45 female; 2 digital coaxial audio on RCA connector, female, follows SPDIF format IEC 60958; 2 Analog balanced/unbalanced 6-pin terminal block
- TMDS Bandwidth: 9 Gb/s tota
- Deep Color Support: Supports digital video formats in Deep Color Mode up to 8 bits/color with all HDMI and HDCP technologies
- Link: Single Link
- DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
- HDMI Video/Audio Signal: 1.2 Volts p-p
- DDC Communication: EDID And HDCP buffering between source and display
- Wired IR: Modulated IR signal input, 0-5V TTL or -10 to +10V, 3.5mm mono female connector with signal on tip
- Power: External power supply; 12V/3A
General:
- Regulation: CE, RoHS, WEEE
- Rack Mount: 1U, full rack-width (rack ears included)
- Accessories: Rack Ears
- Product: 17.25” x 8.875” x 1.75”; Weight: 6.5 lbs
- Packaging: 18.5” x 13” x 3.5”; Weight: 8.8 lbs
- Power Supply (qty 1) 12V/5A, 60W, desktop type, model KDSP60W12VC
- IR Remote Control: KD-RMMLV
- Rack ears
- Operating Instructions
- Warranty Card
Reviews
There are no reviews yet.