100v line mixer amp, tuner, MP3, Bluetooth DAB
$450.00 Inc GST Add to cart

100v line mixer amp, tuner, MP3, Bluetooth DAB

$450.00 Inc GST

100v line mixer amp, tuner, MP3, Bluetooth DAB

Can Order From Suppler Delivery Times Vary as some shipments are Delayed - Contact For ETA

Brand:In design

Free NZ shipping on all orders over $499 (Select at Checkout)

  • $9 Flat Rate Shipping (For Orders Under $499)
  • Order Before 12pm to get Dispatched Same Day (Hamilton Stock Only) Excludes Weekends and Holidays
    *If Only 1 item is Left in stock this may have been opened for display
    *Image is for illustrative purposes only. Please refer to product description.

Description

Media Player & Mixer Amplifier – DAB+/FM/MP3/Bluetooth

The inDESIGN MP30D – 30 watt, all-in-one mixer amplifier is designed for small to medium installations where multiple playback sources are required. The in-built FM tuner, DAB+ tuner, USB and MP3 player allow easy playback of your favourite radio station, or music stored on a USB drive.

The MP30D delivers 30 watts via 8© or constant voltage 100V and 70V speaker outputs and features 2 Microphone/Line inputs with individual gain control for external audio sources and microphones. A ‘pre-amp out/power amp in’ link allows for the mixer audio signal to be sent to an external equaliser or a booster amplifier.

  • Output power: 30 watts. 8Ω or constant voltage 100v/70v line
  • AC power supply: Internal universal power supply (110VAC – 240VAC)
  • Output low impedance: 8 ohm
  • Hi impedance output: 70V / 161 ohm, 100V / 333 ohm
  • Input sensitivity: Microphone 5mV, Line 500mV
  • Frequency response: 90Hz – 16KHz, +/- 1dB
  • THD (at -3dB rate power): -0.5% @ 1KHz
  • Tone control: Bass 100Hz + – 10dB, Treble 10kHz + – 10dB
  • Protection: Thermal protected at 75 degrees, short circuit overload
  • Size mm: 220 x 66 x 200
  • Weight kg (Net): 2.8
  • FM radio: 88 – 108MHz. 10 preset stations
  • DAB+ frequency range: 168MHz – 240MHz
  • Bluetooth: V3.0, V4.0 supported
  • USB playback: MP3 & WMA supported
  • Line Output level: 600mV
  • Mains power: Internal universal power supply (110VAC – 240VAC)
  • Power consumption: 60 watts
  • Safety: RCM / CE / EMC
  • Channel separation: >50dB
  • Noise level: <75dB
  • DC power supply: 21-25V
  • AC fuse: T1AH 250V 5 x 20 mm

* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.

Brand

In design

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.