Description
Media Player & Mixer Amplifier – DAB+/FM/MP3/Bluetooth
The inDESIGN MP30D – 30 watt, all-in-one mixer amplifier is designed for small to medium installations where multiple playback sources are required. The in-built FM tuner, DAB+ tuner, USB and MP3 player allow easy playback of your favourite radio station, or music stored on a USB drive.
The MP30D delivers 30 watts via 8© or constant voltage 100V and 70V speaker outputs and features 2 Microphone/Line inputs with individual gain control for external audio sources and microphones. A ‘pre-amp out/power amp in’ link allows for the mixer audio signal to be sent to an external equaliser or a booster amplifier.
Output power: 30 watts. 8Ω or constant voltage 100v/70v line
AC power supply: Internal universal power supply (110VAC – 240VAC)
Output low impedance: 8 ohm
Hi impedance output: 70V / 161 ohm, 100V / 333 ohm
Input sensitivity: Microphone 5mV, Line 500mV
Frequency response: 90Hz – 16KHz, +/- 1dB
THD (at -3dB rate power): -0.5% @ 1KHz
Tone control: Bass 100Hz + – 10dB, Treble 10kHz + – 10dB
Protection: Thermal protected at 75 degrees, short circuit overload
Size mm: 220 x 66 x 200
Weight kg (Net): 2.8
FM radio: 88 – 108MHz. 10 preset stations
DAB+ frequency range: 168MHz – 240MHz
Bluetooth: V3.0, V4.0 supported
USB playback: MP3 & WMA supported
Line Output level: 600mV
Mains power: Internal universal power supply (110VAC – 240VAC)
Power consumption: 60 watts
Safety: RCM / CE / EMC
Channel separation: >50dB
Noise level: <75dB
DC power supply: 21-25V
AC fuse: T1AH 250V 5 x 20 mm
* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.
Attachments
indesign_mp30d_data-sheet.pdf
mp30d_manual_07-2019_a5.pdf
Reviews
There are no reviews yet.