DVA KS10 Active 18″subwoofer
$3,999.00 Original price was: $3,999.00.$2,999.00Current price is: $2,999.00. Inc GST Add to cart
Sale!

DVA KS10 Active 18″subwoofer

Original price was: $3,999.00.Current price is: $2,999.00. Inc GST

-25%

DVA KS10 Active 18″subwoofer

1 In Stock in Waikato Stores

Free NZ shipping on all orders over $499 (Select at Checkout)

  • $9 Flat Rate Shipping (For Orders Under $499)
  • Order Before 12pm to get Dispatched Same Day (Hamilton Stock Only) Excludes Weekends and Holidays
    *If Only 1 item is Left in stock this may have been opened for display
    *Image is for illustrative purposes only. Please refer to product description.

Overview

Featuring a Class D 900W RMS Digipro G3 digital amplifier

Description

The semi horn loaded subwoofer DVA KS10 is equipped with a single 18″ woofer driven by a Class-D Digipro@G3 power amp delivering 2000W Peak and reaching 134 dB SPL. Maximun versatility is granted by a stereo input/output balanced pre-amp. Crucially, KS10 can be used as a compact PA system (together with DVA K5 on a speaker pole) or groundstacked, but can also be flown thanks to the optionally available flyware. A dedicated encoder aloows to apply up to 4.5 ms of delay, with 0.5 ms speps. A switch allows to invert the phase by 180° as well as changing the LPF from 90 Hz to 120 Hz.

Use it in a compact PA system, on a pole, groundstacked or flown in a DVA K5 array, this active sub is the most versatile low-end bin of the DVA series.

Specifications

Technical Data  
Speaker Type Active Semi-horn loaded Flyable Subwoofer
   
Acoustical data  
Frequency Response [- 10 dB] 41 Hz – 120 Hz
Max SPL 134 dB
Directivity Omnidirectional
LF 18 “
Voice Coil LF 4 “
   
Amplifier  
Amp Technology Digipro® G3
Amp Class Class D
RMS Power 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with auto range PSU
   
Processor  
Controller DSP 56 Bit
AD/DA Converter 24 Bit / 48 KHz
Limiter Dual Active Multiband RMS, Peak, Thermal
Crossover Frequency LF-HF 90, 120 Hz (selectable)
Slope LF-HF 24 dB/Octave
   
Input  
Input Section 2X XLR Balanced
Output Section 2x XLR Balanced
Power Sockets 1 x Powercon In +
1 x Powercon Out
Controls 1 x Input Sensitivity Rotary Switch
1 x DSP Rotary (up to 4.5 ms on-board)
1 x Polarity Inversion Switch (0°-180°)
1 x X-Over Frequency Switch (90 Hz, 120Hz)
1 x Output Mode Switch (Link – X-Over)
   
Mechanics  
Housing Multiplex plywood
Handles 2x Side
Pole Mount 1x M20 on top
Rigging Points 2xPick Points on top to fix DRK 10/20 rigging frames
Width 515 mm (20.27 in)
Height 640 mm (25.19 in)
Depth 720 mm (28.34 in)
Weight 43.4 kg (95.69 lbs)

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.