DigiTech Whammy DT Pitch Shifting Effects Pedal

$599.99 Inc GST

or 6 weekly interest-free payments from $100.00 with Laybuy

DigiTech Whammy DT Pitch Shifting Effects Pedal

$599.99 Inc GST

or 6 weekly interest-free payments from $100.00 with Laybuy

or 4 fortnightly payments of $150.00 with Afterpay More info

DigiTech Whammy DT Pitch Shifting Effects Pedal

1 In Stock in Hamilton Warehouse Dispatched Within 24 Hrs (can be backordered)

or 6 weekly interest-free payments from $99.99 with Laybuy what's this?

SKU: WHAMMYDTV-02 Category: Product Brand:

Free NZ shipping on all orders over $499 (Select at Checkout)

  • $9 Flat Rate Shipping (For Orders Under $499)
  • Order Before 12pm to get Dispatched Same Day (Hamilton Stock Only)


Product Features
  • Whammy, Harmony and Detune Effects
  • Drop and Raised Tuning Effects
  • Hammer-on and Pull-off Effects
  • True and DSP Bypass Modes
  • Reliable and Road Worthy Construction


The Whammy DT Pitch Shifting Effects Pedal by DigiTech builds upon the legendary Whammy pedal by adding more effects, drop and raised tuning, a momentary switch for hammer-on/pull-off effects and switchable True and DSP bypass modes. Simply put, the Whammy takes your guitar sound and shifts the pitch up or down using special algorithms and is then controlled with the onboard expression pedal creating new and exciting sounds.

The Whammy DT includes classic whammy voices plus three different effects; Whammy, Harmony and Detune. It also provides drop and raised tuning in half steps or over an entire octave in just one setting. Quickly stomp on the momentary switch and create cool, hammer-on/pull-off effects or hold it down for quick chord shifts and surprising note changes for that searing solo or gritty bridge.

Key Features

  • Includes classic whammy voices plus Whammy, Harmony, Detune and Drop Tune effects
  • Provides drop and raised tuning in half step increments or over a full octave in one setting
  • Momentary switch creates hammer-on/pull-off effects, quick chord shifts and sudden note changes
  • MIDI input allows you to control the Whammy DT’s effects from most any MIDI controller
  • Switchable True Bypass and DSP Bypass modes
  • FS3X footswitch input for hands-free selection of Whammy and Drop Tune settings
  • Roadworthy contstruction and flashy, Ferrari red finish


Input Unbalanced 1/4″ TS
Maximum Input Level +5 dBu
Input Impedance 1 Mohm
MIDI 5-Pin din
Footswitch Input 1/4″ TRS for use with optional FS3X foot pedal
Output 1/4″ Unbalanced TS
Maximum Output Level +10 dBu
Output Impedance 1 kohm
Sample Rate 44.1 kHz
Frequency Response 20 Hz to 20 kHz
Signal to Noise Ratio > -105 dB (A weighted); ref = max level, 22 kHz bandwidth
THD 0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
A/D Conversion 24 bit
D/A Conversion 24 bit
Pitch Bend Range +2/-3 octaves
Detune Range -4 to -30 cents
Drop Tune Range 1-7 semitones, octave, octave + dry
Power Consumption 2.6 watts < 288 mA at 9 VDC
Power Requirements 9 VDC external adapter
Power Adapter PS0913DC-01 (US, JA, EU)
PS0913DC-02 (AU, UK)
Dimensions (WxDxH) 8.2 x 7.73 x 2.36″ (20.82 x 19.63 x 5.99 cm)
Weight 1.6 kg




There are no reviews yet.

Be the first to review “DigiTech Whammy DT Pitch Shifting Effects Pedal”

Your email address will not be published. Required fields are marked *