Description
The Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilises independent 25 W class-D amplifiers to power a 76.2 mm woofer and a 3/4″ metal dome tweeter housed in a die-cast aluminium enclosure.
The monitor utilises Genelec’s Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 to 20,000 Hz, and provide a maximum SPL of 96 dB.
The amplifiers utilise Genelec’s Intelligent Signal Sensing circuitry to conserve electricity, utilising less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly.
A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.
Specifications
| SPL | Max short term: ≥96 dB |
| Filter | Lower cut-off frequency, -3 dB: ≤ 73 Hz Upper cut-off frequency, -3 dB: ≥ 21,000 Hz |
| Frequency Response | 74 to 20,000 Hz (±2.5 dB) 67 to 25,000 Hz (-6 dB) |
| Drivers | 1x 3/4″ tweeter 1x 3″ woofer |
| Harmonic Distortion | At 80 dB SPL at 1 m on axis 70 to 400 Hz: < 3% >400 Hz: < 0.5% |
| Input | 1x Balanced XLR |
| Input Impedance | 10 kΩ |
| Input Level | For 100 dB SPL output at 1 m: -6 dBu (sensitivity -10 dB off) Level control range relative to max output: -10 dB (sensitivity -10 dB on) |
| Crossover Frequency | Bass/Treble: 3,000 Hz |
| Tilt | Bass control in -2 dB steps: 0 to -6 dB at 100 Hz |
| Amplifier Output | Bass with 8 Ω load: 25 W Treble with 8 Ω load: 25 W |
| THD + N | ≤ 0.08% |
| Voltage | 100 to 240 VAC |
| Operating Range | Voltage: ±10% |
| Power Consumption | Standby: <0.5 W Idle: 5 W Full output: 30 W |
| Dimensions (H x W x D) | With ISO stand: 195 x 121 x 116 mm Without ISO stand: 181 x 121 x 116 mm |
| Weight | 1.5 kg |
Reviews
There are no reviews yet.