Genelec 8040B Active Two-Way 6.5″ Studio Monitor (Single)

Description

The 8040B Active Two-Way 165 mm Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminium enclosure features a rounded shape, which minimises distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8040B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8040B features a 90 watt high frequency amplifier for its 19 mm tweeter, and a 90 watt low frequency amplifier for its 165 mm woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Key Features

An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems
Rear-facing Tone Controls enable you to optimise the speaker to its environment
Threaded holes for Omnimount Series 30 brackets and K&M loudspeaker mounts
More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately
Active crossover filters
Driver unit protection circuitry
Fully magnetically shielded

Specifications

Inputs
1x XLR balanced

Frequency Response
48 Hz to 20 kHz (± 2 dB)45 Hz to 21 kHz (-3 dB)

Crossover Frequency
3.0 kHz

LF Amplifier
90W

HF Amplifier
90W

Maximum SPL
105 dB

Low Frequency Driver
165 mm

High Frequency Driver
19 mm metal dome

Controls
Sensitivity Adjustment DialPower SwitchTone Controls:Treble Tilt (Off, -2 dB, -4dB, +2 dB @ 15 kHz)Bass Tilt (Off, -2 dB, -4 dB, -6 dB @ 100 Hz)Bass Roll-Off(Off, -2 dB, -4 dB, -6 dB @ 45 Hz)Desktop Control (-4 dB @ 160 Hz)

Mounting Options
Tabletop (with included Iso-Pod)Four 0.24 x 0.39″ (6 x 10 mm) threaded holes for Omnimount Series 30 brackets and K&M loudspeaker mounts

Enclosure Material
Die-cast aluminium

Power Supply (AC)
120V

Voltage Range
±10%

Power Consumption
Idle: 10WStandby: <0.5WFull Output: 110W

Dimensions (H x W x D)
With Iso-Pod: 365 x 237 x 223 mmWithout Iso-Pod: 350 x 237 x 223 mm

Weight
8.6 kg