Kali Audio LP-8 2nd Wave MKII Pair Deal

Performance
Transparency. Clarity. Accuracy.
Kali Audio’s Lone Pine Series studio monitors are designed to allow you to hear every detail that’s happening in your mix.This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you’ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
The 2nd Wave goes even further, utilizing a more robust DSP for an even flatter frequency response on the top end.

100WClass D Power

37 HzLower Frequency Response

< 2.5% System THD94 dB @ 1M 

117 dBMax SPL

The LPs have always been praised for their accuracy, and we’re pleased to share that the 2nd Wave versions realize slight but noticeable improvements in that regard, particularly on the top end.

Full resolution measurement data is available below. The data chart may be imported into REW for viewing.

*On-axis response measured on a ground plane with 1/6th octave smoothing. Full resolution measurement data may be downloaded below.

Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion. The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily. Full output specifications, along with maximum listening distances, can be found in our user’s manual.Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need. Bass response is not boosted or overhyped, but you can be sure that you’re hearing the bass that you have on the track.Protective limiters prevent harmful voltage from ever reaching the drivers, so there is no risk of blowing these speakers. These have been updated for the 2nd Wave, allowing for 3 dB higher output.Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.

Boundary EQ ControlA speaker’s given position in a space can drastically change it’s frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.Happily, most of the common positions are fairly predictable and easily corrected.Kali’s team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers. For the 2nd Wave, the boundary EQs have been updated for using the speakers on a desk with monitor stands.Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed.Easy ConnectionsThe LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.

Specifications

 
LP-62nd Wave
LP-82nd Wave

Powered:
Yes
Yes

Amp Class:
D
D

Power Config:
Bi-Amped
Bi-Amped

HF Power:
40 W
40 W

LF Power:
40 W
60 W

Total Power:
80 W
100 W

HF Driver:
1-Inch Textile Dome
1-Inch Textile Dome

LF Driver:
6.5″ Optimized Paper
8″ Optimized Paper

Crossover:
1500 Hz
1800 Hz

Frequency Response (-10 dB):
39 Hz – 25 kHz
37 Hz – 25 kHz

Frequency Range (±3 dB):
47 Hz – 21 kHz
45 Hz – 21 kHz

Recommended Listening Distance:
0.5 – 2.5 Meters
0.5 – 3.5 Meters

Max SPL:
115 dB
117 dB

System THD:
<3% from 80 Hz to 1.7 kHz <2% above 1.7 kHz (90dB SPL @1m)
<2.5% from 80 Hz to 400 Hz <1.4% above 400 Hz (90dB SPL @1m)

Unbalanced Inputs:
1 x RCA
1 x RCA

Balanced Inputs:
1 x XLR, 1 x TRS
1 x XLR, 1 x TRS

TRS/XLR Input Sensitivity:
94dB SPL @1m (anechoic) for +4dBu input
94dB SPL @1m (anechoic) for +4dBu input

RCA Input Sensitivity:
94dB SPL @1m (anechoic) for -10dBV input
94dB SPL @1m (anechoic) for -10dBV input

Enclosure:
Front Ported
Front Ported

Height:
14.125 Inches (35.9 cm)
16.5 Inches (41.9 cm)

Width:
8.75 Inches (22.2 cm)
10 Inches (25.4 cm)

Depth:
10.25 Inches (26 cm)
11.25 Inches (28.6 cm)

Product Weight:
15.54 lbs (7.05 kg)
19.8 lbs (9 kg)