The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.
The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates in the 655 – 679 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B6) or as an alternative a headset microphone with belt pack (LDRBUD10HSB6) and an IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.
Specifications
Product number
LDRBUD10HSB6
Product type
Battery-powered PA speaker
Low/mid driver dimensions
10″
Woofer size
254mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1″
HF driver dimensions (mm)
25.4mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
120W
Peak power
480W
Frequency response
55 – 18000Hz
SPL (1W/1m)
96dB
Max. SPL
115dB
Protection circuits
over-current, overload protection, short circuit
Controls
CD / Tape IN Level, Total volume, Mic 2 Level, AUX / MP3 switch, low, Mic 1 Level, Echo, high
Indicators
Charge/battery status, Power
Media player
Supported media
Bluetooth, USB stick, SD Card
Supported formats
WMA file, WAV-CD, MP3 file
Media player controls
Play / Pause, Previous Track, Next Track, Mode (Menu / Bluetooth /SD / USB), Repeat, equalizer, Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
1
Line input connectors
2 x XLR, 3.5 mm jack, 2 x RCA, 6.3 mm jack
Mic inputs
2, 2 x XLR, 6.3 mm jack
Wireless Unit
Transmission frequency range
655.000 – 679.000MHz
Modulation Type
FM
Channels
16
Frequency Response Wireless Unit
50 – 17000lx @ 1mHz
Controllers Wireless Unit
Power / Volume, Mute Level (Squelch), ASC, Value Up, Value Down
Indicators Wireless Unit
LED Display, AF (LED), RF (LED)
Connections Wireless Unit
nTNC for receiver antenna
RF Transmitter Power Output
10mW
Handheld Microphone Weight
0.285kg
Handheld Microphone Material
aluminium
Operating voltage
Switching power supply, 220 V – 240 V AC / 50 Hz, 100 V – 120 V / 60 Hz
Rechargeable batteries
12 V / 5 Ah
Cabinet material
polypropylene
Cabinet construction
vented
Width
415mm
Height
525mm
Depth
328mm
Weight
16.5kg
Other features
Transport casters, Stand mount 36 mm, extendable handle, IR Remote for Media Player, transport handle
Reviews
There are no reviews yet.