SKB Audio and DJ Rack Case

The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage.
Note: Item may be pictured with the 1SKB-AV8 Retractable Shelf but is not included with this item.

Features

10U Slanted rackmount on top
4U rackmount in front
Room for cables
Hard lid and doors
Side access ports for cable routing
Injection molded front and rear doors and lid
Two TSA locking patented trigger latches
Stackable for storage and transport

Specifications

Exterior Length

23.25 in

59.06 cm

Exterior Width

23.50 in

59.69 cm

Exterior Depth

17.75 in

45.09 cm

Carton Length

24.00 in

60.96 cm

Carton Width

18.50 in

46.99 cm

Carton Depth

24.00 in

60.96 cm

Rack Space Units Top

10

10

Rack Space Units Bottom

4

4

Rack Depth Rail to Rail

6.00 in

15.24 cm

Rack Depth Front Rail to Back Lid

19.50 in

49.53 cm

Shipping Weight

28.00 lb

12.70 kg

Product Weight

24.00 lb

10.89 kg

Rack depth is listed at 6″ and that is referencing the top of the rail on the slant portion of the case. At the bottom of the rail, the depth is 3.75″. If nothing is mounted in the 4 spaces on the front, then the actual depth at top of the slant rail would actually be 13.5″. After the first 3″ from the bottom of the slant rail (and with nothing mounted in the 4 spaces on the front), the depth is 11.75″. Space between the top of the slant rails and the cover is ~3.5″ (to allow XLR/cable connections on mixer with top mounted mic pres). Product weight is without the optional 1SKB-AV8. The 1SKB-AV8 weighs 6 pounds.