Standard Snaptoggles
The SNAPTOGGLE anchor is a heavy-duty hollow-wall anchor for use in walls, ceilings, or floors of materials such as gypsum board, drywall with a steel stud, concrete block, tile over drywall, etc. The ratcheting strap / locking cap assembly positions the one-piece zinc-plated (or stainless) steel anchoring channel flush against the rear of the wall. The cap slides down the straps to lock flush against the front of the wall. The straps on the outside of the wall are then easily and quickly snapped off by hand flush with the surface of the wall (no extra tools required). Holding is dependent only on a metal bolt to metal channel connection.
Toggler brand Snaptoggles, suit different size machine screw / bolt – Not Included. HEAVY Duty for Hollow Materials, Drywall, Plaster, Block… Can be used for Large TV’s, Mirrors, Bookshelves, Sinks, Cabinets…
SNAPTOGGLE anchors get their name from their speed and ease of use—they work in a SNAP!
The patented SNAPTOGGLE anchors is the best on the market because:
- Smallest drill hole for each bolt size — 1/4″ wing toggle needs 50% larger hole
- High strength — holds up to 2x the load of an old-fashioned wing toggle of same bolt size
- Reusable in same hole — remove the bolt without losing the anchor
- One-person installation — like having an extra pair of hands behind the wall
- Insulation pushed aside by metal channel
- Does NOT destroy wall or ceiling — plastic cap & metal channel centers bolt & prevents abrasion
SNAPTOGGLE Toggle Bolts can be used in all hollow materials, including:
- Drywall
- Gypsum Board
- Plasterboard
- Plaster
- Concrete Block
- Cinder Block
- Aerated Concrete
- Stucco
- Composite Panels
- Acoustic Ceilings
- Fiberglass
- Cement Board
- Green Board
J.D.Tweedie (NoLastName) (verified owner) –
Yes,the design is good, but m10 was too big for purpose, need an M6