USB I/O VSR Dual Channel Broadcast Standard USB Audio Interface

Plug and Play or Install ASIO Driver – your choice

The ARX USB I/O VSR installs as a fully compatible generic USB audio device. The default sample rate of 24 bit 44.1 KHz requires no special driver program installation on Mac OSX, Win XP, and Win7 or 8 – just plug and play.

ASIO Driver
To run the expanded Hi Res sample rates of 48 and 96 KHz, an ASIO driver is available for download from the ARX website – http://www.arx.com.au/drivers.htm.

Please make sure you have the USB I/O VSR connected to the computer before installing the driver.

Controls and Connectors
The front panel has Left and Right transformer balanced and isolated analog XLR Input and Output connectors that connect to all standard balanced analog Inputs and Outputs. On the rear panel there is a Type B USB connector, as well as a ground lift switch. Sample Rate LEDs indicate that the USB I/O VSR is connected and operating, and also which Sample Rate has been selected.

Transformer Balanced
The USB I/O VSR features full transformer balanced Inputs and Outputs, providing the isolation required to eliminate earth loops / ground hum and other extraneous interaction noise and distortion.

Analog style headroom
Analog 0dB In = –18dB, FS Digital, providing Analog style headroom when recording in the digital domain. The signal then reverts to 0dB Analog Out, giving you the best of both worlds.

Plug and Play Option
We recommend running Win XP or later, or Mac OS X. Plug the USB I/O VSR into an unused USB port on the computer and it will be recognised as ARX Systems USB, and ready to use.

About Variable Sample Rate
The USB I/O VSR has a default sample rate of 44.1KHz, the same as used for audio CDs. This is the sample rate you get when you Plug and Play with the USB I/O VSR.

But, by installing the ARX ASIO driver you can sample the music at 48KHz or 96KHz, for even greater definition.

Full Download and Installation instructions are on the ARX website.

The USB I/O VSR is housed in a heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and non-slip rubber base pad. It is ideal for interfacing any USB equipped computer (especially notebook/laptop computers) with the balanced inputs and outputs of professional sound systems.
Security features include Kensington®-type computer lock slot and optional bracket kit for under-table mounting.

The ARX USB I/O VSR is available in Dual Channel format, includes a premium quality USB-A to USB-B cable, and is hand made in Australia

USB I/O Schematic Diagram

AudiBox PLUS sized devices like the USB I-O VSR have a slightly enlarged chassis in order to fit all the connectors across the front and rear! Click on image at Right to see larger version

Connector USB type B port

Codec High Resolution 24 bit, 44.1 KHz Plug and Play; switchable sample rates of 48 and 96 KHz with ASIO driver

Selectable Buffers :

Streaming Buffer 1mS, 2mS, 4mS, 8mS, 16mS, or 32mS
ASIO Buffer 64, 128, 512, 1024, 2048, 4096, or 8192 samples

ASIO Driver http://www.arx.com.au/drivers.htm

Important – make sure the USB I/O VSR is connected to the computer before installing the Driver

Maximum Analogue Input Level +12dB

Digital recording and playback level for 0dB analog in –18dBFS (full scale)

Maximum Analog Output Level +12dB

Input Impedance 10 KOhms Transformer Balanced

Output Impedance 300 Ohms Transformer Balanced

Maximum Input Level Nominal 0 dB

Maximum Output Level Nominal 0 dB

Input/Output Noise USB – System dependent

Frequency Response 20 – 20 KHz ± 0.5 dB

Power Operating current via USB Port 80mA

Input Connectors
2 x Female XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 via ground Lift switch

Output Connectors
2 x Male XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 via ground Lift switch

Construction
All-steel baked enamel coated chassis, fibreglass PCB, epoxy printing,
non-slip rubber base. Package includes a premium quality USB-A to USB-B cable

System Requirements

• Windows PC running Windows XP, 7/8/10, Mac running OS X or later
• USB port
• Audio software installed
• ARX ASIO Driver loaded http://www.arx.com.au/drivers.htm

Note: The sample rate will default to 44.1 Khz if ARX ASIO Driver is not used.

ASIO Driver and Installation information