Amps Played by Legends
Channel the powerful clean tone of the Acoustic 370* amp model, or stand out with the warm punchy tone of an Ampeg SVT*. The MS-60B+ faithfully reproduces 11 classic amps and cabinets using our Multi-layer IR technology.
Come Together
Mix and match up to 6 effects, amp models, and preamps to build the perfect bass rig. Or, explore the history of bass with 85 presets based on famous songs from the 60’s to today.
Split It
The MS-60B+ allows you to split output signals. This allows you to output with Amps/IR’s to a PA, while simultaneously outputting without Amps/IR’s to your amplifier.
Next Generation Circuitry
The MS-60B+ is designed with new high-fidelity analog circuits. The flat phase response provides sharp attacks and clean low end, giving the pedal more refined tonal characteristics.
Color Coded LCD Screen
The LCD backlight changes color to make it easier to distinguish each category of effects while scrolling.
Control Knobs
Fine-tuning and adjusting amp models and effects can be done with the four encoder knobs.
Cross Key Switches
The Cross Key switches allow you to easily switch between effects and patches with a tap of your foot.
MS-60B+ Features
- 95+ Bass effects, including amps, preamps and effects
- 11 preamp models
- 11 realistic amp/cabinet models with Multi-Layer IR
- Use up to 6 effects at the same time
- 100 memory patches (85 factory preset + 15 user)
- Improved analog circuit with minimal sound deterioration
- Single stompbox design
- 4x Cross Key switches (MEMORY / SCROLL) for easy operation by foot
- Improved UI for easier navigation and control
- Stereo output supports split output signals and stereo effects
- LCD backlight that changes color depending on the selected effect category
- USB MIDI Support
- Runs on 2 AA batteries or AC Adapter
- Chromatic tuner supports all standard bass guitar tunings, including open & drop tunings
- Handy Guitar Lab App for iOS
Specs
| MAXIMUM NUMBER OF SIMULTANEOUS EFFECTS | 6 effects | |
| USER PATCH MEMORIES | 100 | |
| SAMPLING FREQUENCY | 44.1 kHz | |
| A/D CONVERSION | 24-bit 128× oversampling | |
| D/A CONVERSION | 24-bit 128× oversampling | |
| SIGNAL PROCESSING | 32-bit | |
| FREQUENCY RESPONSE | 20 Hz – 20 kHz (+0.5 dB/−0.5 dB) (when 10kΩ load) | |
| DISPLAY | 160×128 dot-matrix LCD | |
| INPUT | INPUT | Standard mono phone jack Rated input level: −20 dBu Input impedance (line): 470 kΩ |
| OUTPUTS | L/R | Standard mono phone jack Maximum output level: +7.2 dBu (when output impedance 10 kΩ or higher) |
| INPUT S/N | 122 dB | |
| NOISE FLOOR (RESIDUAL NOISE) | L/R | –100 dBu |
| POWER | AC adapter: 9V DC 500mA center negative (ZOOM AD-16) 2 AA batteries (alkaline, lithium or rechargeable NiMH batteries) | |
| ESTIMATED OPERATION TIMES USING BATTERIES | • These values are approximate. • Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions. | Alkaline batteries: about 7 hours NiMH batteries (1900 mAh): about 6.5 hours Lithium batteries: about 14 hours |
| USB | Port: USB 2.0 Type-C / Supported cable type: Type-C Handy Guitar Lab: USB 1.1 Full Speed • Use a USB cable that supports data transfer. USB bus power is supported. | |
| DIMENSIONS | 133 mm (D) × 79 mm (W) × 61 mm (H) | |
| WEIGHT | 353 g (excluding batteries) 400 g (including batteries) |
Reviews
There are no reviews yet.