Zoom ZDM-1 Podcast Mic Pack with Headphones, Windscreen, XLR, And Tabletop Stand

Product Features

Optimised for Podcasting & Vocals
ZDM-1 Dynamic Mic and Custom Windscreen
Headphones, Tabletop Stand & XLR Cable
End-Address, Tuned for Rich Voice Tone
Supercardioid Pattern Reduces Room Noise

Description
Tuned to deliver a robust vocal tone with smooth highs and tight lows, the Zoom ZDM-1 Podcast Mic Pack with Headphones, Windscreen, XLR, and Tabletop Stand is an affordable dynamic microphone that’s ideal for podcasters, radio show announcers, rappers, and singers. Thanks to its high SPL handling and broad frequency response, this end-address mic makes it easy to capture your voice with mix-ready broadcast quality.
The large-diaphragm dynamic capsule utilises a supercardioid pickup pattern to effectively reduce ambient sound such as room noise at the sides of the mic. To isolate the pickup element from handling noise, vibrations, and rumble, the ZDM-1 employs an integrated shock-absorbing mechanism. The ZDM-1’s integral humbucking circuit improves the signal-to-noise ratio by inhibiting electromagnetic interference from common sources such as wireless devices, power lines, computer displays, and more.
The all-metal body and grille afford ruggedness and durability for reliable use session after session. The ZDM-1 includes a pivoting mic stand mount for easy positioning and a custom windscreen for attenuation of plosives and breath noise.
Key Features:

Large-diaphragm dynamic design captures smooth, broadcast-quality sound
Classic end-address style
Supercardioid polar pattern provides focused pickup and excellent isolation
High 135 dB SPL handling ensures clean recordings every time
50 Hz to 18 kHz frequency response with tight bass and smooth highs enhances vocal tone for radio, podcasting, and more
Internal shockmount provides isolation from bumps and handling noise
Built-in humbucking circuit rejects electromagnetic interference
Balanced XLR output connector
All-metal body and grille stands up to daily use
Includes pivoting mic stand mount, threaded adapter, and custom windscreen

Specifications

Microphone

Form Factor
Stand/Boom Mount

Sound Field
Mono

Operating Principle
Pressure Gradient

Capsule
1 x Dynamic

Polar Pattern
Supercardioid

Orientation
End Address

Circuitry
Solid-State

Pad
None

High-Pass Filter
None

Tone Adjustment
None

Indicators
None

On-Board Controls
None

Windscreen
Foam (Included)

Performance

Frequency Range
50 Hz to 18 kHz

Maximum SPL
135 dB SPL

Impedance
200 Ohms

Load Impedance
200 Ohms (Minimum)

Sensitivity
-54 dBV/Pa

Connectivity

Output Connectors (Analogue)
1 x XLR 3-Pin Male

Headphone Connector
None

Physical

Colour
Black

Mounting
3/8″-16 Female, 5/8″-27 Female (with Included Hardware)

Construction Material
Metal

Dimensions
ø: 2.12 x L: 5.19″ / ø: 5.38 x L: 13.18 cm

Weight
14.11 oz / 400 g

Headphone

Earpiece Design
Over-Ear (Circumaural), Closed-Back

Earpiece Connection / Wearing Style
Headband

Driver Type
Dynamic

Driver Size
1.57″ / 40 mm

Magnet Type
Neodymium

Impedance
68 Ohms

Active Noise Cancellation
No

Foldable
No

Contact Pressure
4.5 N

Performance

Frequency Response
10 Hz to 20 kHz

Sensitivity
102 dB SPL at 1 kHz / 1 mW

Maximum Power Handling
200 mW

Wired Connectivity

Audio Connector to Source
1 x 1/8″ / 3.5 mm TRS Male Straight

Adapter (Included)
1/4″ TRS

Cable Design
Single-Sided, Detachable

Audio Connector to Earpiece
1 x 1/8″ / 3.5 mm Male

Cable Length
9.84′ / 3 m

Cable Colour
Black

Physical

Water Resistance
None

Material of Construction
Leatherette

Weight
6.7 oz / 190 g

Stand

Height
3.85 to 5″ / 9.78 to 12.70 cm

Base Type
Tripod

Adjustment Type
Twist Clutch

General

Mounting Thread
5/8″-27 Male

Finish
Black