dB Technologies LVX 12 2-Way Active Speakers

The black LVX 12 12″ 2-Way Active Speaker from dB Technologies is equipped with a DIGIPRO amplifier delivering 800W (Power PRG). The active two-way speaker features a 12″ woofer (voice coil 1″) and compression driver 1″ (voice coil 1.5″) on a 90 x 40° horn. The speaker’s horizontal directivity is 90° by default factory setting. The speaker is made of 15mm birch plywood. The 3 plastic handles and the 12 M10 threads located on the sides and the back of the speaker enable easy transport and installation.

LVX active loudspeakers series is the answer to all those fixed installations and live music requirements where sound reinforcement systems must be lightweight, stylish, portable, powerful and in line with the highest professional standards.

Coming from the experience gained in designing touring products as the renowned DVX series, the new LVX series offers smart solutions with a special attention to the needs of fixed and portable installations.

The voicing of these speakers is very linear and designed to for any audio content, such as speech, background or live music, multimedia contents, etc., respecting their characteristics without problems and with a high level of performance.

LVX 12 features a 12” woofer and a 1” compression driver on a 90° x 40° rotatable horn. This last feature is particularly valued even in case of use as stage monitor, thanks to the rear angle of 45°.

The LVX 12 is equipped with a 800W DIGIPRO® digital amp module. This highly efficient amplifier provides high power, limited weight and is totally silent due to the low thermal dissipation and no cooling fans required.

The digital preamp with DSP controls audio crossover, frequency response, active peakRMS-thermal limiter, and acoustic alignment. A selector enables to select one of two different EQ curves – “FLAT” or “PROCESSED“ – to provide the right sound in any occasion.

The enclosure is made of a 12mm MDF with a look very elegant and refined. The scratchresistant finishes are available in both black and white. There are three handles (one on top; two on sides), 12x M10 rigging points and a Ø36mm pole mount cup to allow this speaker to be used in any kind of installation or gigs.

In case of installation where you want to keep as much as possible a stylish and sober look, a kit of handle-caps is available to cover the handles and keep surfaces as linear as possible.

Finally, there are two types of wall-mounting brackets; one with pan-tilt adjustment and fixed locking system, the other with even quick-release pins, ideal for all those events where you need to frequently remove the speaker without losing the exact mechanical positioning.

Features
2-Way Active Speakers
800W Class-D Digipro® amplifier
12” woofer (2” voice coil)
1” compression driver
90° x 40° directivity
Rotatable Compr. Driver Horn
AD/DA 24 bit 48 kHz
EQ presets selection
Peak, RMS, Thermal Limiter
12x M10 Rigging points
No Cooling Fan
Applications
Live sound
Stage Monitoring
Portable and installed audio-visual systems
Clubs, ballrooms, houses of worship, Museums and Theatres
Specifications
System Active 2 A
Amplifier Type Digital: Class-D DIGIPRO G2 technology
Power PRG: 800 W
Peak Power 1600 W
Frequency Response -6 dB: 62 Hz to 19 kHz
-10 dB: 55 Hz to 20 kHz
Crossover LF to HF: 1800 Hz 24 db/oct
Range Cover: 90 x 40° (rotate)
Sound Pressure 127 dB maximum
Cooling Convection, fan-free
Processor Audio Conversion: 24-bit/48 kHz
Volume Control: Digital
Limiter Peak, RMS, thermal, limiters
Component Parts 12.0″ (30.4 cm) Woofer: 2.0″ (5.1 cm) VC
Compression Driver: 1.5″ (3.8 cm) VC
Input Sensitivity Nominal: -3 dBu max
Impedance Input: 2.2 kOhms / 20 kOhms
Power Supply 100 to 120 VAC, 50 to 60 Hz
220 to 240 VAC, 50 to 60 Hz
Inrush Current 6.9 A
Current Consumption 100 to 120 VAC, 50 to 60 Hz: 3 A
220 to 240 VAC, 50 to 60 Hz: 1.6 A
Housing Trapezoidal
Material Steel
Support Flying: 12 x M10
Handle 1 plastic (top side)
2 plastic (one per side)
Mount Pole-mount cup: D36mm (aluminium)
Grille Frontal: Performed sheet 1.5 mm with internal foam
Dimensions 14.71 x 24.02 x 14.17″ (36.00 x 61.00 x 36.00 cm)
Weight 37.4 lb (17.0 kg)