Opera Speaker Kit With 10″ Powered Speakers & Free Stands and mixer

This kit includes Free Pair of Stands and Mixer Yamaha MG06X  Saving $484 While Stocks Last 
The dB Technologies Opera 10 1200W 2-Way 10″ Active Speaker is designed with DSP processing, a Class-D amplifier, and a two-input channel audio interface. It can accept mic, line, or instrument signals and it is also flexible to both playback plus live-music applications.
The system is equipped with a powerful Class-D 1200 W Peak amplifier featuring advanced DSP processing where FIR filters allow the system to deliver consistent audio performance to the different listening positions.
The Opera 10 acoustic asymmetrical horn is optimised for efficient use in different indoor and outdoor situations. It can be installed on an optional speaker stand, or on a truss or wall using (separately available) brackets.
Key Features:
Sound Coverage
The horizontal sound coverage is differentiated between the value of 85° (upper part) and 120° (lower part), for an optimised sound emission during vertical installation in reverberate environments.
The overall 85° vertical opening is asymmetrical, to increase the horn’s sound pressure at long distances. When mounting the speaker, take these data into account for calculating the coverage of an environment.
Amplifier Controls
This system is comprised of a Class-D digital amplifier that operates silently and does not require fan cooling. The system is controlled by a dedicated DSP that manages the different parameters.
Input and Output Controls
The dual-input section is equipped with selectable combo XLR-1/4″ connectors on both channels. Channel 1 can accept mic or line-level sources and Channel 2 is suitable for instrument or line-level sources. The selectable XLR output offers a choice of a mixed out or ch-1 LINK for connection to a second speaker.
DSP Presets
The Opera 10 includes an 8-position DSP Preset rotary switch for the following options:

Club: suitable for medium-small indoor environment
Vocal: optimises vocal playback and performance
Bass Reduction: with attenuation of low frequencies, for use in reverberant environments
Playback: optimised for music playback (such as MP3 player)
Bass Boost: suitable to emphasise low frequencies
Wedge Vocal: to be used in monitor (wedge) position and vocal performance
Wedge Playback: to be used in monitor (wedge) position and playback of a music programme
Flat: to be set if no equalisation is required

For Installation Use
The Opera speaker can be installed on a tripod stand, coming as a standard option with a 1-3/8″ diameter pole. The maximum allowed height between the speaker base and the floor is 62.9″. With the installation of the DS-2S accessory, it is possible to use the Opera speaker directly on subwoofer provided with a pole cup.
The speaker can be wall-mounted or installed on a truss in the vertical or horizontal position with additional accessories and it is also possible to instal the speaker using eyebolts (all sold separately).

Specifications

Speaker Type
2-Way Active Speaker

Acoustical Specifications
 

Frequency Response (-10 dB)
58 Hz to 20 kHz

Frequency Response (-3 dB)
70 Hz to 19.6 kHz

Max SPL
128 dB

High Frequency Driver
1″ / 2.54 cm Exit

Voice Coil Diameter
1.4″ / 3.5 cm

Driver Type
Compression Driver

Horizontal Coverage Angle
Asymmetrical 100° (85° up / 120° down)

Vertical Coverage Angle
85° (+25° / -60°)

Horn
2000 Hz (24 dB/Oct.)

Crossover Frequency
2 kHz

Low Frequency Driver
10″ / 25.4 cm

Voice Coil Diameter
2″ / 5 cm

Amplifier
 

Amplifier Technology
Amp SMPS Power Supply Dual Range

Amplifier Class
Class-D

RMS Power
600 W

Peak Power
1200 W

Processor
 

Controller
DSP 56-Bit

AD/DA Conversion
24-Bit / 48 kHz

System Settings
Rotary Encoder (8 Presets)

Connectivity
 

Input
Ch1: 1 x Combo XLR-1/4″ (MIC/ LINE)Ch2: 1 x Combo XLR-1/4″ (MIC/ INST/ LINE)

Output
1 x XLR Male (CH1 LINK / MIX OUT) Switchable

Additional Product Specifications
 

Housing
Polypropylene

Grille
Metal

Handles
1 x Left Side1 x Top

Rigging Points
2 X M10 on Top1 x M10 on Back

Pole Mount
1-3/8″ / 36 mm

Angle Adjustment
Monitor use 45°

Power Specifications
115 VAC, 1.6 A

Dimensions (W x H x D)
11.8 x 21.1 x 11.8″ / 300 x 552 x 301 mm

Weight
27.1 lb / 12.3 kg