Specs
iLoud Micro Monitor Specifications
- Type: 2-way active, bi-amped studio monitor
- Frequency response (-10dB): 45Hz – 22kHz
- Crossover frequency: 3kHz
- Tweeter: 3/4″ silk dome, neodymium magnet
- Woofer: 3″ high-rigidity custom composite material
- Maximum SPL @ 50cm (with two speakers playing, averaged sinewave from 100 Hz to 10 kHz): 107dB
- Number of amplifiers: 4
- Amplifiers type: High Efficiency Class-D
- Total output power (both speakers): 70W (peak) – 50W RMS
- Low frequency output power (single speaker): 18W RMS
- High frequency output power (single speaker): 7W RMS
- Acoustic settings: high shelf (0dB or -3dB from 4kHz up); low shelf (0dB or -3dB from 250Hz down); desktop (+3.5dB between 1kHz and 10kHz and -1dB below 400Hz)
- System total latency (analog input): 1.02 ms
- System total latency (Bluetooth input): 155 ms (depends on host implementation, tested on iPhone 6S / iOS 10.0.1)
- High performance Bass-Reflex port
- Totally DSP controlled
- Connectors: 2 x RCA input (cable included); TRS 1/8″ stereo input; 4-pin speaker connector (cable included)
- Bluetooth® compatible with A2DP protocol
- Size: 180mm/7.09″ x 135mm/5.31″ x 90mm/3.54″
- Weight: 920g/32.45oz (left speaker), 800g/28.22oz (right speaker), 1,720g/60.67oz (left + right speaker)
Package includes
- 2 x iLoud Micro Monitor speakers
- Power supply unit
- Power supply cable
- 4-pin speakers connection cable (1.5m/59.1″)
- TRS 1/8″ stereo to 2 x RCA cable (1.5m/59.1″)
Dimensions
- Size: 180mm/7.09″ x 135mm/5.31″ x 90mm/3.54″
- Weight: 920g/32.45oz (left speaker), 800g/28.22oz (right speaker), 1,720g/60.67oz (left + right speaker)
System Requirements
iLoud Micro Monitor is equipped with a wired connection (RCA and TRS 1/8″ stereo input) compatible with Mac, PC, iPhone, iPad, iPod, Android smartphones and tablets and MP3 players. It’s also compatible with most Bluetooth®-enabled devices compatible with A2DP protocol.
Giles Allom (verified owner) –